Deep Pour, Casting & Art Resin
Premium quality epoxy resin for projects requiring a deeper pour such as river tables, casting and moulding. Two products that allow for pours of up to 2" and 4" at once. You may pour deeper, but bubble-release won't be as efficient while curing. The 2" version has a faster cure time than the 4" version.
.75 Gallon (2.85 L) | 2'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
1.5 Gallon (5.7 L) | 2'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
3 Gallon (11.4 L) | 2'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
6 Gallon (22.8 L) | 2'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
.75 Gallon (2.85 L) | 4'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
1.5 Gallon (5.7 L) | 4'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
3 Gallon (11.4 L) | 4'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
6 Gallon (22.8 L) | 4'' Deep Pour, Casting & Art Resin | Clear Epoxy Resin Kit
Epoxy Resin Helix Mixer | Helix Drill Attachment | 11.8 inches
Deep pour epoxy buying guide
Our Deep Pour, Casting & Art Resin comes in two formulas: 2-inch and 4-inch. The number is the maximum depth of one pour. This guide helps you choose the formula, buy the right amount and plan your pours.
2-inch or 4-inch: which one to choose
Choose the formula by the depth of each pour, not by the total thickness of your project. Pick a formula whose maximum depth is above your pour depth. Then you can keep the room at about 24 °C from start to finish, which helps bubbles escape. Read more about choosing the right product and managing room temperature.
- 2-inch formula: for pours from 1/4 inch to 2 inches (about 5 cm) per layer. It cures faster, in about 2.5 days. Use it for charcuterie boards, trays, castings and river tables.
- 4-inch formula: for pours over 2 inches and up to 4 inches (about 10 cm) per layer. It also works for thinner pours, but it cures more slowly: it is tack-free after about 3 to 4 days.
- Example: for a river table that is 2 inches deep, the 4-inch formula lets you pour once at about 24 °C. With the 2-inch formula, keep the room at about 18 to 20 °C for the first hours, or pour two 1-inch layers.
How much resin to buy
Measure only the space the resin will fill. For a river table, this is the channel between the slabs, plus any cracks and voids. Enter the length, width and depth in the epoxy calculator. It adds 5% for normal losses.
Example: a river 72 in long, 8 in wide and 2 in deep needs about 5.2 US gallons (19.8 L) of mixed resin. One 6-gallon kit is enough. Our guide How much epoxy resin do I need? shows how to measure irregular live edges.
- Kit sizes: 0.75 gal (2.85 L), 1.5 gal (5.7 L), 3 gal (11.4 L) and 6 gal (22.8 L).
- The kit size is resin and hardener together. For example, the 6-gallon kit has 4 gallons of resin (A) and 2 gallons of hardener (B).
Mixing, temperature and cure times
Before you start, read the instructions for the 2-inch resin or the 4-inch resin. For a full project, see our river table guide. Wear gloves and eye protection, and ventilate the room.
- Mix ratio: 2 parts resin (A) to 1 part hardener (B) by volume, or 100A:45B by weight.
- Mix slowly for 4 to 5 minutes. Scrape the sides and bottom of the container.
- Working time: about 3 to 6 hours. Do not leave a large batch in the bucket, because it heats up faster there.
- Temperature: 18 to 25 °C (65 to 77 °F), ideally about 24 °C. Near the maximum depth, keep the room at about 18 to 20 °C for the first hours.
- Bubbles: about 15 minutes after the pour, pass a torch quickly over the surface.
- Next layer: pour it while the previous layer is still tacky, after about 24 hours (2-inch) or 48 hours (4-inch). If the layer has fully cured, sand it with 180 to 220 grit first.
- Cure: the 2-inch resin cures in about 2.5 days (full cure after about 4 days). The 4-inch resin is tack-free after about 3 to 4 days (full cure after 7 days). Wait 7 days before you put items on the surface.
Frequently asked questions
Can I pour deeper than the maximum depth?
We do not recommend it. A deeper pour releases bubbles less well and can overheat. Pour several layers instead, each within the maximum depth of your formula.
Can I use the 4-inch resin for a pour under 2 inches?
Yes. It works well, but it takes longer to cure than the 2-inch resin.
Do I need to seal the wood first?
Yes, a thin seal coat is recommended. It stops air in the wood from rising as bubbles into the pour. Pour the next layer while the seal coat is still tacky, or sand it with 180 to 220 grit if it has fully cured. More tips: 10 tips to eliminate bubbles.
When can I remove my piece from the mould?
When the resin is hard and no longer tacky: after about 2.5 days with the 2-inch resin, or about 3 to 4 days with the 4-inch resin, at 21 to 24 °C. Thick or cool pours need more time. See our moulds.
Can I add colour to deep pour resin?
Yes. The resin mixes well with mica powder and other colourants. Add colour little by little until you get the look you want. See our pigments.
