Magic Resin

How to Make Resin Keychains: A Beginner’s Guide

By Magic Resin•
Clear and translucent teal resin initial keychains with gold foil details and silver rings beside a kraft gift box.

A clear initial, a favourite colour and a few tiny gold flecks can turn a simple keyring into a personal gift. Resin keychains are a manageable project to practise in small batches, whether you are making stocking stuffers, a bag charm or a matching set for friends.

To make epoxy resin keychains, pour accurately measured and thoroughly mixed resin into a clean silicone mould, let the casting cure, then attach suitable keychain hardware. The details that matter most are the mould’s finish, the mixing ratio and a secure attachment point.

Choose a mould and resin that work together

Start with a simple letter or a rounded shape with enough solid material to hold a connector. Very thin strokes and narrow corners can be awkward to demould and leave little room for hardware. Check the size of the individual cavity, not just the overall mould dimensions: an alphabet mould can produce anything from tiny embellishments to large display letters.

A mould with a built-in hanging hole makes assembly easier. Without one, plan where an eye screw will sit before pouring. Look for a smooth, glossy cavity if you want a shiny casting straight from the mould. A textured or matte cavity transfers that texture to the resin.

Magic Resin Art & Craft Epoxy is designed for small castings and moulds, with pours up to approximately 3/4 inch (about 2 cm) per layer. It is a practical choice for this project. Browse our silicone resin moulds and check each shape’s dimensions before choosing.

What you will need

  • Art & Craft resin and hardener, plus a clean, dry silicone mould
  • Graduated mixing cups or a suitable accurate scale, stir sticks and a protected, level work surface
  • Nitrile gloves, eye protection and a ventilated workspace
  • Key rings, connecting rings or chains, and eye screws if your mould has no hanging hole
  • Small pliers and, if needed, a pin vise with a drill bit matched to the hardware
  • Optional epoxy-compatible translucent dye, mica or decorative foil

Choose hardware separately to suit the finished piece; do not assume it is included with a mould. Follow the product label and safety data sheet, and keep uncured resin away from children, pets and food-preparation areas.

1. Plan the design before mixing

For a first keychain, use clear resin with a sparse scattering of foil, or one pale translucent colour. Leaving open space makes the depth and clarity easier to see. Too many inclusions can hide the letter shape and trap air in small corners.

Check which side of the casting will be the front. The face against the bottom of a flat mould often becomes the display side, so lettering or directional details may need to be arranged accordingly. Keep the future attachment area clear of bulky decorations.

Set the mould on a firm, level board and remove dust or lint gently. If you wash it, allow it to dry completely before pouring.

2. Measure and mix a small, accurate batch

Check the mould maker’s stated capacity or measure its capacity with water before starting, then dry every cavity thoroughly. Letters have different volumes, so do not assume an “I” takes the same amount as an “M”. Prepare only what you can pour within the working time.

For Magic Resin Art & Craft: mix 1 part A with 1 part B by volume, or 100 parts A with 90 parts B by weight. For example, 30 mL of A plus 30 mL of B gives 60 mL of mixed epoxy. When weighing, 30 g of A needs 27 g of B. These are separate measuring methods; equal volumes do not mean equal weights.

Use measuring equipment precise enough for your batch. Stir slowly for 4–5 minutes, reaching the sides and bottom. Follow the current Art & Craft instruction guide for working conditions and timing. Aim for a stable room temperature of 20–25°C, including while the pieces cure. A cold garage is a poor place to leave a small casting overnight.

3. Add colour and fill the details

For a see-through finish, choose a translucent dye. Mica creates shimmer and usually a more opaque appearance. Add colour gradually, following the colourant’s directions, and keep the resin-to-hardener ratio unchanged. Our epoxy pigment collection includes options for both looks.

Pour a little mixed resin into the cavity first. Gently guide it into narrow points and around any hole-forming post with a toothpick or suitable small tool. Add a few foil flakes if desired, then continue filling without overflowing the rim. Do not scrape the final residue from the mixing cup into the mould.

Inspect corners while the resin is still workable and release visible trapped air gently. Avoid prolonged heat or a direct flame against silicone. On a tiny letter, repeated heating can do more harm than the bubble you are trying to remove.

4. Let the keychain cure before handling

Leave the mould level and protect it from dust with a cover that does not touch the resin. Art & Craft generally cures in about 24–36 hours, although thin pieces and cooler conditions can take longer. Do not force a flexible casting out to meet a gift deadline.

Peel the silicone away gently once the casting is firm enough to release. Support narrow sections instead of pulling on them. Allow a week before everyday wear and tear, and wait until the resin is fully hard before drilling or finishing. If the edge needs smoothing, work only on cured resin and control sanding dust.

5. Attach the key ring securely

If the mould created a hanging hole, fit an appropriately sized connecting ring through it and attach the chain or split ring. Use pliers to close the connector completely so there is no gap for the chain to escape.

For a casting without a hole, choose an eye screw sized for its thickness. Support the fully cured piece securely and make a small pilot hole with a pin vise, following the hardware supplier’s sizing guidance. Wear eye protection and control drilling dust. Keep the hole centred in a solid section, away from thin edges, and avoid drilling through the display face.

Fit the screw gently without overtightening. If the hardware calls for adhesive, use a compatible product and allow it to cure as directed. Check the connection with a gentle pull before attaching keys or giving the piece away. A loose screw or cracked attachment point needs fixing first.

Questions about DIY resin keychains

Why is my keychain cloudy instead of clear?

Inspect the mould first: a matte cavity gives a matte surface. Fine bubbles, moisture or too much opaque pigment can also affect clarity. Make one clear test piece to separate a mould-finish issue from a colour or mixing issue.

Does a resin keychain need a topcoat?

Not automatically. A smooth casting from a glossy mould may already have the finish you want. Extra coating adds another curing step and can obstruct a hanging hole. Decide after inspecting the cured piece.

Can I use UV resin instead?

UV resin can suit small, thin pieces when the curing light reaches all of the resin. Thick letters, dark colours and opaque inclusions make that harder. This tutorial uses two-part epoxy; see our UV resin guide before changing materials.

How should I package and care for a finished keychain?

Let it cure fully before packaging, then cushion the resin so the metal ring does not rub against it in transit. Clean with a soft damp cloth and avoid abrasive cleaners, prolonged direct sunlight and high heat. Resin can scratch alongside metal keys, so a bag charm may stay looking pristine longer.

Start with one initial

Make a single test keychain before pouring a whole gift set. You will learn how the mould releases, how clear the finish looks and where the hardware fits. Once that first piece works, repeat the same process in the recipient’s favourite colour. Explore Magic Resin Art & Craft kits to get your next small casting project started.

Shop All Products