











Light Grey | Floor Epoxy Resin Kit for Garages, Basements, Warehouses, Retail Stores | Choose Size
Same-day shipping on orders placed Mon-Fri by ~3:00 pm.
Know what you want? Shop below. Not sure? Use the kit builder.
Build My Floor KitProduct Description
This floor epoxy resin is made primarily for floors, from wood to concrete & more. The kit contains the resin and the hardener. Select your desired kit size above.
NOTE: This floor epoxy kit includes the clear epoxy and the light grey pigment bottles to colour the epoxy at mix time (or pre-mix with the resin). The pigment bottles are added in the clear epoxy box(es).
PRODUCT INFORMATION:
-
Mix ratio: 2A (Resin) to 1B (Hardener) by volume, e.g. 1 L Resin with 500 ML hardener.
-
Mix for ~3 minutes.
-
Working time: ~45 minutes (however, how long it stays in the mixing container can decrease the working time).
-
Pot life: Approx. 20 minutes in the container (the longer it stays in the mixing container, the less the working time once poured will be).
- Coverage: Approximately 175 sq.ft. per gallon of mixed product per coat. For porous surfaces like concrete, a seal/base coat is needed. Apply the seal coat by rolling or "squeegeeing" the product evenly across the surface, and allow it to harden until it's still tacky but not completely dry. Once the seal coat reaches the desired stage, the next layer can be applied. Typically, two such coats are recommended to achieve the best results and durability.
✅ Home Use Versatility: Floor epoxy is perfect for home areas like basements and garages due to its stain resistance. It turns dull concrete into attractive, easily cleaned surfaces. With various colours and finishes, it enhances aesthetics while being cost-effective and durable.
✅ Industrial and Commercial Use: Epoxy resin flooring is ideal for industrial and commercial environments due to its durability, resistance to chemical spills, and heavy traffic. It offers enhanced aesthetics, easy maintenance, and increased safety features. It's a cost-effective, sustainable flooring solution.
✅ Durable and Resistant: Epoxy resin for floors is highly durable and resistant to a variety of damaging factors.
✅ Enhanced Aesthetics: Epoxy resin flooring can significantly enhance the visual appeal of a space. It is available in a wide range of colours and can also be customized with patterns, designs, or logos. The high-gloss finish of epoxy flooring can create a bright and professional look.
✅ Easy Maintenance and Cleanliness: Epoxy flooring is non-porous and seamless, which prevents the accumulation of dirt, bacteria, and other contaminants, making it easy to clean and maintain. These properties make it a popular choice for environments where hygiene is a priority, like healthcare facilities or food and beverage production plants.
✅ Improved Safety: Epoxy resin floors can be modified with various additives to increase safety features. These could include non-slip surfaces or line markings for paths and zones. In addition, the high-gloss surface can reflect light effectively, enhancing visibility within the workspace.
✅ Fast Delivery: We deliver to most provinces/cities in 1-2 business days including, Quebec, Ontario, Alberta, New-Brunswick, British-Columbia, Manitoba, Saskatchewan Calgary, Vancouver, Montreal, Edmonton, Toronto etc.
For more information on the usage and properties, please review our Instructions PDF: MAGIC RESIN FLOOR EPOXY RESIN INSTRUCTIONS GUIDE
FEEDBACK: If you need more information, or have different needs, please email us and let us know: contact@magicresin.ca
Floor Coating Application Videos
Basic Application – Concrete in Good Condition
Advanced Application – Damaged Concrete
Recent customer reviews
- ★★★★★David B.Verified buyer
Defective product, Weight deeply dents the floor months later
The installation of this metallic epoxy project was easy, and everything looked completely normal and beautiful right after the main coat. I followed the instructions perfectly, using a precise graduated cup for the exact ratios, and allowed it to cure for a full week between each coat before protecting it with a Solidex top coat. Both the room and the concrete floor temperatures were well within the ideal range, between 15°C and 20°C. Yet, months later, the epoxy layer never truly hardened, leaving deep, permanent marks under any weight. To make matters worse, the MVB (Moisture Vapor Barrier) layer turned out even softer than the main product. This is clearly a product defect. As proof, I used a patching epoxy from a different brand in the exact same area under the same conditions, and it cured perfectly hard. Do not buy if you need a durable finish.
- ★★★★★WallyRC
What went wrong? Wood shed floor 121 sqft
Wood shed floor 11x11 feet or 121 sqft. South west Ontario. 100 percent humidity. Mixed pigment thoughly in resin, then mixed in hardened for 1 minute with drill. Applied using proper serated squeegee. Had the spiked roller but never used it, as no bubbles formed. 1 hr and started to soak in wood leaving grain showing. 4 hrs and grain showing all over and still soft in thick areas and tacky where thin. Looks like I will have to let harden then re-coat.
- ★★★★★Shawn E.Verified buyer
Didn’t receive the grey pigment in the order
Didn’t receive the grey pigment in the order,
- ★★★★★Brian T.Verified buyer
Easy peezy for a fresh look!
This was an easy job that gave the garage a new finish look. Everyone who sees it compliments me on it. They ask where to get it and I send straight to Magic Resin. The only thing I would ask magic resin to do would be to put a mark on the hardener bottle at the half gallon point so when you are doing the job a week apart you can precision mix both sets. It is hard to eyeball a half gallon and get it exactly right. My first mix was much better than the second so I may have been a little short on hardener for the second mix.
- ★★★★★AnonymousVerified buyer
Great
Great product
Frequently Bought Together
Flakes for Epoxy Resin Floor Coatings 1/4'' | High Quality | Garage Floor Chips | Choose Size and Color
Clear | Floor Epoxy Resin Kit for Garages, Basements, Warehouses, Retail Stores | Choose Size
18” Professional Lint-Free Epoxy Roller – Floor Epoxy, Polyaspartic & MVB
Aluminum Oxide - Non-Slip Additive
Moisture Vapor Barrier Floor Epoxy Primer (MVB) for Garages, Basements, Warehouses, Retail Stores | Choose Size
Epoxy Spike Shoes - One Size Fits All
Medium Flake Coverage Floor Epoxy & Polyaspartic Kit | 250 or 500 sq. ft.
Polyaspartic Aliphatic Polyurea | Ultra Durable and Excellent UV Stability | Clear | Choose your size
Why Choose Magic Resin
Pro-Grade Clarity & UV Defense
Crystal-clear, scratch- and yellow-resistant formulas for all pours from table top and floor coatings to deep river table pours.
FREE Canada-Wide Shipping (1–2 Day Avg. Delivery)
Multiple warehouses across Canada so you get your resin quickly!
One Tree Planted Per Item
Every item purchased funds reforestation, offsetting our carbon footprint.
Canadian-Owned & Bilingual Support
Real humans in Canada who answer fast and in-depth in either English or French.Contact us now
Full Resin Range for Any Project
Deep-pour, tabletop, art, UV, floor epoxy, pigments, moulds & more.
Thousands of 5-Star Maker Reviews
Trusted by artists, woodworkers, DIYers, and contractors & installers nationwide.
